Miller GEN III MAF
The Best BMW MAF Conversion Kit Available
Description
Benefits:
|
 M20b25 MAF Conversion (e30) STOCK CarM30b35 MAF Conversion (e34) STOCK Car M30b34 MAF Conversion (e24/e28) STOCK Car Miller MAF Frequently Asked Questions |
Miller Performance is the only company to bring an affordable mass air flow conversion to the market with a long standing, proven track record. Not only is it affordable, it is the ONLY plug and play MAF conversion that has no hassles and needs no end user adjustment. It is all taken care of on the chip provided with our conversion. Over the past 12 years, the Miller MAF has built a solid reputation for being one of the best bolt on performance products you can use on your early model BMW car. With an unheard of price, and supreme signal quality there is no other choice that can come close to competing with our system.
ECU Software REQUIRED AND INCLUDED:
Whenever you change the air metering device on your engine, you MUST recalibrate the tune. Because each model of sensor has its own unique air flow curve, the ECU needs to be reprogrammed to use and understand the signal properly. Our MAF software is unrivaled. Not only does our software take care of the intricate details associated with recalibrating the code for a new sensor type, we also optimize all other parameters to yield the best performance. With years of software development behind us, we have FLAWLESS tunes for your BMW. With software available for stock applications to high horsepower turbo applications, we have the solution for you that will blow your mind with its pristine drivability.
E30 M20 recomendation:
We highly recommend including a fresh, new rubber intake boot with the installation of your MAF sensor. We recommend this for the M20 engines because the stock intake diameter is only 2.7" in diameter. If your intake boot is old, chances are it is pretty dry and you won't be able to avoid the boot tearing when you install the MAF. We have new intake boots available. With a little heat from boiling the boot in water, the fresh rubber becomes soft enough to easily stretch over the 3" MAF housing without issues. For old and dry boots, boiling doesn't always work since they are typically quite brittle. We have both intake boot options since M20's have two possible styles. Type 1 and Type 2 are shown below and are available for purchase here.
Still don't know what you need? Here is a general application guide.
Recent Reviews
-
Could not be happier with the performance. Fit and appearance is top notch; and the sound it makes is worth every penny on its own.Victoria - Canada
Excellent product, my car BMW 635CSi is working great after the MAF upgrade. Now has a steady idle and quick response and low mpg as...Read moreCanovanas - Puerto Rico
Great Product and the guys at Miller Performance were great helping me out with some hiccups on the install. have had about 15,000kms on...Read moreNewcastle - Australia
Great, but got a little ignition knock on low rpm's after mounting this.Roan - Norway
Want to say thank you for all the help and sending me a replacement part that was my fault. Got the car done and"...
Read moreBend - United States
M20 factory intake elbow
ProStreet Induction Kit