2009 was a good year for us. It was a bit slow, but in the economic crunch everyone was experiencing, those that play with cars needed to keep their sanity and always found a way to keep playing. We took advantage of the situation and developed some great new products, bought new equipment and expanded our operation slightly.
Miller Tuning Packages
With the release of our WAR Chip in early 2009, we had a great response. With a few hundred WAR Chips out for active duty, people have been getting the most performance out of their unique cars.
We have introduced our tuning packages late in 2009, but they are officially a product of 2010. These Tuning packages consist of our MAF Conversion, WAR Chip, and Injectors. These are offered for stroker and turbo applications with injector ranges from 30lbs/hr to 42lbs/hr.
Price from $599 - $850
Available for:
E24 635
E28 535
E30 325
E32 735
E34 525
E34 535
Miller Adjustable Fuel Pressure Regulator
Fuel Pressure regulators are a maintenance item. Over the years, they tend to wear out. Our new, 100% stock mountable, adjustable fuel pressure regulator gives you the ability to increase your fuel pressure from the stock 3 Bar(43 psi), up to 5 Bar (at atmosphere) for the added performance you may need. Increased fuel pressure helps to deliver more fuel; helps atomize the fuel for a more efficient burn and can increase power.
The Miller Adjustable fuel pressure regulator is made from quality OEM parts modified in house. They feature a billet aluminum cap, as well as stainless steel hardware.
Price: $199
Available for:
E23 735
E24 635
E24 M6
E28 535
E28 M5
E30 318
E30 325
E30 M3
E34 525
E32 735
E34 535
Miller Air to Liquid Intercooler
The Miller Air to liquid intercooler is designed for the M30 engine for turbo applications. It provides the most direct path from the turbo to the intake manifold. The Miller Air to Liquid intercooler lets you safely make more horsepower by efficiently reducing the charge temperature allowing you to run more timing, and or more boost safely.
This air to liquid cooler is easily able to support up to 650 HP. It is available in Wrinkle Black, Wrinkle Red powder coat, or our signature “smoked copper” color.
Price: $1095
Miller Turbo Cam
Miller Performance has designed a great turbo cam for your boosted M30 turbo project. Our Signature Turbo cam was measured in house by hand at a clearance of .006" to provide accurate specs.
Our turbo cam helps improve the M30's top end without sacrificing a lot of low and mid end power and torque. This cam helps the M30 feel more like an M engine in the way it delivers top end power.
Price: $350
Miller M30 Turbo Manifold
New for 2010 is our M30 turbo log manifold. Our log manifold offers better turbo placement allowing for two things; more room for a downpipe to be properly designed increasing response and overall performance and better charge tube plumbing for an aligned intake path to the throttle body. Another advantage of our turbo manifold is that you can use a wider variety of turbochargers unlike manifolds that require on-center turbine housings.
Our manifold is guaranteed for life and can come ceramic coated in Cermakrome™or black.
Price: $799
Miller M20 Turbo Adapter
Finally some boost attention for the M20! The Miller M20 Turbo Adapter allows you to retain your stock exhaust manifolds. This provides a cost effective alternative for turbo charging your M20 engine. The flange is T3 based and designed for an internally gated GT28 or GT30 turbo.
The Stock exhaust manifolds offers better flow compared to a traditional log style manifold.
The Manifold adapters are made from schedule 40 pipe fitting and come ceramic coated in Cermakrome™ or black. As usual, these are guaranteed for life just like our other manifolds.
Price: $490
Miller W.A.R. Platform Limited Edition
If you have ever had your laptop sit on the passenger seat while tuning on the road or dyno, you would probably agree that the angled position is kind of irritating. The Miller W.A.R. Platform raises your laptop up to a comfortable level and eliminates that irritating angle. Use it on the street or on the dyno, the W.A.R. Platform helps improve ergonomics.
Cut from 1/8” aluminum and powder coated Military Black, these simple, yet handy accessories help make your tuning experience even more enjoyable.
Articles 