059 MAF Ready for Gen III

E28's and e24's Can Rejoice!

- Gen III is now compatible for 059 ECU's

We have been very busy with the launch of the W.A.R. Chip and the transition between generation 2 and generation 3 MAF conversions. Finally, the wait is over! The extremely popular conversion for the e28 and e24 crowd is ready to go and better than ever! Over the years, we have learned so much about these older cars and their ECU’s and it shows in the quality of our tuning and the power gains achieved.

With an impressive improvement in power across the board, the Miller Gen III MAF Conversion is definitely the best bang for your buck bolt on available today. With more power throughout the entire RPM band, the MAF conversion can boast a highly impressive 20 ft lbs increase in torque at 2800 RPM, as well, 15 HP and 15 ft lbs increase at 5200 RPM. This is WHEEL HP! All achieved on a factory Airbox, and filter.

See for yourself with the DYNO SHEET and HP Break down.